Rumors Involving S3F
I was asked to write a post here by the Admins to address an issue or better yet a photo that has been floating around. More so because we support this group and many of you have our products in your Glocks.
Let me be straight to the point. S3fsolutions has never and will never use another company’s aftermarket barrel to relabel and put our name on. Period. We produce 100% of our barrels in house in our own machine shop. We have our own 5 axis machines, we broach in house and we hone in house.
Our barrels are held to the highest of quality with QC being very important thing to us. If coating is wrong we fix it, if laser is wrong we fix it. if POI / POA shift is off, we replace the barrel. We are shooters building products for shooters. You should never see a “double laser” image on a barrel, and everyone of our products has the caliber marking on the top area of the hood, and we edge break every our barrels as well.
How we produce our product is held extremely close to chest, so much so that we drop none see through curtains around everyone of our machines and fixtures when a outside person comes in the shop. We also are a closed facility that does not allow any walk through. Everything we do is held to NDA and none competes with every employee we have.
Simply put, no one builds a pistol barrel like we do.
We say and have been known for “Accuracy Matters”, and we mean that in every avenue. We simply produce a extremely accurate drop in barrel for less money. And in every step of production from start to finish we strive for perfection. If at any point a issue comes about, you can always contact us and we will make it right.
As always, Thank you, to everyone that has supported us and believed in us as we pave our way in the industry. We started last year at just 44 barrels produced our first run. Today we are doing over 5000 barrels a month, expanding our barrel line, and have some of the best shooters in the world representing us.
Stay deadly Gentlemen,
Chris Naganuma
CEO of S3Fsolutions
Chris@S3Fsolutions.com
Comments
So empty here ... leave a comment!