Lorddumbledick
Amateur
If only the dot was an RMR... *sigh*. Call me an elitist or brand myopic or whatever you want, but I don’t know of a better dot for slide mounting than an RMR. It sure as hell ain’t a sig optic either
If only the dot was an RMR... *sigh*. Call me an elitist or brand myopic or whatever you want, but I don’t know of a better dot for slide mounting than an RMR. It sure as hell ain’t a sig optic either
I've mentioned before, if I could design my perfect pistol red dot sight it would honestly resemble a strange hybrid of the RMR's owl-ear hood design with a window the size of the DPP/R1, have a top- or side-loading battery, and offer the option to have a green LED, and if it could somehow incorporate a solar panel as a backup to the battery that would be neat too. But until someone releases that optic, and/or until I start having issues with the R1, I see no immediate need to entirely replace the optic that's currently on the gun for my personal purposes
I don't get the appeal of a solar panel on that type of optic. Battery life measured in years? Why would I need an alternative power source?
If only the dot was an RMR... *sigh*. Call me an elitist or brand myopic or whatever you want, but I don’t know of a better dot for slide mounting than an RMR. It sure as hell ain’t a sig optic either
I would agree with you on the Type 2. Currently only in possession of Type 1’s. Bend the battery contact and only run Duracells. Haven’t been let down since making those two things part of the recipeIf the programming wasn't absolutely dicked on the type 2 I would agree, but it is, so I don't.
I would agree with you on the Type 2. Currently only in possession of Type 1’s. Bend the battery contact and only run Duracells. Haven’t been let down since making those two things part of the recipe
If the programming wasn't absolutely dicked on the type 2
Are you referring to the reset to automatic mode after 16 hours or is there some glitch that I am unaware of? I knew of the LED emitter plate falling off but didn't know of any electronics issues.
Double that and you’re still about 10 behind what I have for my blaster. Just sayin’
Double that and you’re still about 10 behind what I have for my blaster. Just sayin’
Oh I get it and wasn’t trying to bag in you for not having enough. As you say it’s s decent start. Between all my mag fed guns I’ve probably got 60 to 70 total of various types. My worst representation is my Savage.308. Only have 2 for that. I’d like to get a couple of Snyder’s 10 rounders for it but at $120/each that will take a while. A pair of 4 rounders will have to do for now.Oh I very much intend to double it. Or triple it. But this is a decent start, at least in my opinion. At least now I have a couple backups to the shorter Compact mag that previously I'd only had one of, the one that came with the RX Compact X-Change kit
Oh I get it and wasn’t trying to bag in you for not having enough. As you say it’s s decent start. Between all my mag fed guns I’ve probably got 60 to 70 total of various types. My worst representation is my Savage.308. Only have 2 for that. I’d like to get a couple of Snyder’s 10 rounders for it but at $120/each that will take a while. A pair of 4 rounders will have to do for now.
They take a stock Savage mag and weld on a big enough piece of a G3 mag to give you 10 rounds then refinish the whole thing. It’s a lot of tedious work. They do 15 round .223 mags.Good god, $120 for a ten round 308?! And I thought P320 mags were expensive at $35/piece...
They take a stock Savage mag and weld on a big enough piece of a G3 mag to give you 10 rounds then refinish the whole thing. It’s a lot of tedious work. They do 15 round .223 mags.