SierraEleven79
Amateur
I am looking for suggestions for monocular (or overall PVS-14) operating/training. I am currently operating with an ITT Gen 3 PVS-14 and a DBAL A3 (newly purchased). The DBAL is mounted to a 16" BCM with a 15" Keymod rail at the 12 o'clock position. Being new to the NVG/IR Laser community I am looking for training suggestions. So far, I have zeroed the VIS/IR LASER and done one training session where I have (1.) verified zero (2.) adjusted IR illuminator to IR LASER (3.) ran basic target transition drills with B8's, roughly 15 yards apart with controlled pairs on each and longer strings on fire.
My main concern is basically I have a limited experience with NVG/IR LASER training and I want to focus my training in the right direction. I've focused tasks at the basic level by only conducting menial tasks (loading mags, adjusting win/elev, prepping equipment under NVG's and anything else I can think of) under NVG's. I have done target zero, target transition, and limited distance shooting under NVG's. I am open to any nuances, or solid practices the community can provide. Thanks in advance.
My main concern is basically I have a limited experience with NVG/IR LASER training and I want to focus my training in the right direction. I've focused tasks at the basic level by only conducting menial tasks (loading mags, adjusting win/elev, prepping equipment under NVG's and anything else I can think of) under NVG's. I have done target zero, target transition, and limited distance shooting under NVG's. I am open to any nuances, or solid practices the community can provide. Thanks in advance.