I did an unboxing of a Safariland 6360 RDS.
Has anyone tried changing the color of the cordura wrap on a 6354do? I have a lead on a used one but it comes in multicam and I need black.
Try chalking the gun up and seeing where it is hanging up.Ok, I have been monkeying with this off and on for a while and I guess I've reached my limits... FYI: I am modding a recent 6354DO for a G34 + X300 for a CZ P-07 + RM07 + X300U-B + DG Switch + Primary Machine Stealth Comp
I worked in enough clearance for the DG switch but my (recent mfg) holster has the following issues:
1. VERY tight fit - the X300 *seems* to catch on the edges of the internal material and a lot of force is needed to insert/remove the gun once past that
2. the ALS does not lock - maybe I do not have enough clearance?
I was under the impression that newer versions of this holster supported a rear sight in the standard position behind the RMR (closer to the shooter's eye) and that the X300U-B was supported. Am I wrong? At this point the P-07 is the only gun I care to support in this holster so I am not really worried about applying some extreme effort to mod it but I am at the limits of what I know to do...
Any help appreciated!
Ok, I have been monkeying with this off and on for a while and I guess I've reached my limits... FYI: I am modding a recent 6354DO for a G34 + X300 for a CZ P-07 + RM07 + X300U-B + DG Switch + Primary Machine Stealth Comp
I worked in enough clearance for the DG switch but my (recent mfg) holster has the following issues:
1. VERY tight fit - the X300 *seems* to catch on the edges of the internal material and a lot of force is needed to insert/remove the gun once past that
2. the ALS does not lock - maybe I do not have enough clearance?
I was under the impression that newer versions of this holster supported a rear sight in the standard position behind the RMR (closer to the shooter's eye) and that the X300U-B was supported. Am I wrong? At this point the P-07 is the only gun I care to support in this holster so I am not really worried about applying some extreme effort to mod it but I am at the limits of what I know to do...
Any help appreciated!
I have modded several dozen 6360 holsters to fit the Streamlight Contour switch and the Surefire DG. I use a dremel with a large sanding wheel. Results have been good. Go slow, check often.
Did you ever get an answer? Mine does the same thing, but with a Unity slideAnyone have issues with a gun having forward serrations and the serrations chewing up the lock bar on the 6354do? My Agency Arms 17 eats it up with tlr1 or x300 onboard. I've worn through 2 to the point retention os compromised. Looking for a solution so I'm not stuck with a SLS holster to going to another brand like Off The Grid. Thanks