PineTreeMan
Newbie
For anyone that’s been looking, WO has pinch lock rails in stock currently.
I know Hodge rifles use a 9310 bolt, but is there a recommended bolt/bcg pair if I'm building up from parts? Or does anyone know where Jim Hodge gets his bolts?
If I'm spending all the time waiting for parts to come on sale I want to at least get the right bolt and bcg.
Sent from my Pixel using Tapatalk
This is a bit of a silly question because I know there's not really a difference between gas tubes and dust covers, but does anyone know which ones are used on a Hodge upper? I'm trying to build a complete upper and lower from Hodge parts.
Any ideas who made the pin sets on the AU MOD1/MOD2? Based on the description of having the dimpled ends and .030" extended length, I'm assuming they're an older Battle Arms Development design, but I haven't seen any pins from them that match the head profile of those used on complete Hodge rifles.
I believe they are the CMMG extended pins. Sounds like Jim and Jordan are buddies from one of the Modcasts and we know that Jordan worked at CMMG at some point so I put two and two together.
Ordered them before and they looks to be correct.
I apologize in advance, I'm a Hodge noob...Are there any end user differences in the wedge lock and the pinch lock rails? Have the chance to grab a pinch lock in grey
Awesome, thank youBoth are rock-solid and great rails.
Pinch Lock is beefier, a little heavier profile and easier to mount accessories around the gas block.
Wedge Lock is sleeker, lighter, smaller diameter tube and depending on your gas setup, may not let you mount on the MLOK near the gas block if that's an issue.