Surefire tape switch preference | Primary & Secondary

Surefire tape switch preference

Discussion in 'NVG, Lights, & Lasers' started by fmxmyway, Jan 9, 2018.

  1. fmxmyway

    fmxmyway Newbie

    Hey gents,

    I was wondering if you could enlighten me on what the preferred preference is on the tape switch for surefire scout lights. I am aware of the benefits of both designs but was wondering what the preference was over the other and why. DS07 Vs. DS-SR07 ds07-switch.png index.jpg
  2. BooneGA

    BooneGA Newbie

    I use the SRO7 simply for the ability to have the constant on function activated with my support hand. With it though, I cut off the rail attach sections with an exacto knife and glue it to the rail at the 11 o'clock position.

    If you don't need that ability the DS07 is fine too. Both set ups are pricey but the ability to activate the light while firing from your support side is a benefit in my experience.

  3. ggammell

    ggammell Member

    I like the SR07.

    Constant on and a mostly stable built in attachment method.
  4. fmxmyway

    fmxmyway Newbie

    Thanks guys I appreciate it.

Share This Page

Internet Payments