SLR Rifleworks Adjustable Gas block help

#1
While doing a rather thorough clean of my AR today I removed the adjustment screw on my SLR Rifleworks adjustable gas block to clean it and put alittle oil on it to prevent fouling. After doing so I vaguely remember hearing that the adjustment screw shouldn’t be fully removed, but when I looked at their site they only state not to over oil and that the gas block can be stripped in minutes. So my question is did I do anything wrong to the gas block by fully removing the screw? I am still getting very positive clicks when adjusting from fully closed to my normally setting and above. Any help would be great. Thank you!