Show 'em off

[jvencius]

I'll start:
Rem 700 AAC-SD (chopped to 17.5" by Mark @ Short Action Customs)
Surefire MB 762SSAL/RE brake
McRee chassis
Atlas bipod on a Larue LT-17 mount
Seekins base (bedded to the receiver w/JB-Weld)
Badger medium aluminum rings
Weaver Tactical 3-15x50 scope
Timney 510 drop-in trigger (2.5 lb pull)
Aervoe camo paint by the Book of Pat method

 

[shooters101]

Still a work in progress. When the SBR stamp gets here I'll cut it down to 11.5. Also save a match set I'd SN of the same lower I am building Adams Arms 7.5 pistols then in to SBRs for my and my son.

Also sending off a few form 1s in the next week to make another 223 can another .22 can.

 

[Ryan F]

This is my primary sniper/precision rifle. Remington 700 AAC-SD 308 in a McRee G5. Scope is a Vortex PST Viper 2.5-10X32.

 

[Ryan F]

I need to stop buying guns and watches and buy a scope for this rifle. It is a FN SPR in 308. Bedded in a McMillan A4. 24" fluted barrel, CDI bottom metal with AICS magazines.

 

[Ryan F]

Last one for now. Both are Remington 700's. One is a LTR in .223 and the other is a PSS in .308. The 308 is destined to be my Magpul Core rifle. I pre ordered the Magpul stock, magazines, and floorplate for it. I will need to get a different barrel because the one in it now is a bull/heavy barrel. This rifle has changed hands with several snipers in my area. Several years ago a Officer with a different PD got a slot on a SWAT team as a Sniper. He went out and bought a new PSS and sent it to a gunsmith who messed with the trigger, bedded it, and installed the barrel. When he got it back he was informed only factory stock rifles would be allowed.

 

[ta2d_cop]

HS Precision Pro series 2000 HTR in 308 with Nightforce 20moa base and rings and NXS 5.5-22x50 and a Harris bi-pod. The sling is a quick cuff. Going to cerakote the stock FDE or OD this spring I think.

 

[OldSchool45B]

A few of my blasters. Admittedly some are longer range than others.

 

[earthquake]

RWS built 6.5 Creed on a Defiance SA, pushes 140 Bergers out a 25" Bartlein through an SAS Arbiter can (not shown), Manners TF1A with mini-chassis, Harris bipod, Vortex Razor in a Spuhr. Timney trugger.

 

[jwramp]

Rem700 AAC in .308
AICS 2.0 w/ Dipped Viperskins
Vortex Razor 5-20x50 mil/mil
Atlas
AAC 762sdn-6
DBAL just for giggles. I run it on my SBR, never on this one.

 

[earthquake]

More toys. FLIR T105 MUNS and FLIR T75 thermal.

 

[MattJames]

6.5 Creedmoor
26 Inch PROOF Barrel
Mausingfield Action- American Rifle Co
Whiskey III Chassis Folder

Put together by Mark at Short Action Customs; Currently has a NF BEAST H59 on it

OBR 16'' .308
Mk6 3-18 H58

Hunting around for a .308 Stick at the moment, but at this point I'd rather get some more training/professional refresher dialed in.

 

[Rich Fitswell]

Here is one of my two match rifles.

Area 419 Firearms AW cut Hellfire action
6SLR
25.5" 1/8 twist Bartlein
XLR Carbon Chassis
Calvin Elite trigger
Atlas bipod
Thunder Beast 30P-1 suppressor
Sporting a Steiner but soon to be the new Kahles SKMR
SPHUR Mount

Took 1st place last weekend on her debut at the Trigger Time Gun Club Precision Rifle match.

 

[Max Gates]

[/IMG]
remington 700 sps tactical aac-sd
AAC brakeout
KRG Bolt lift
KRG Xray Chassis
Bushnell DMR G2 reticle
Blue Force Gear Sling
Manfrotto Tripod

 

[Max Gates]

 

[1911]

Colt Match Target lower
Magpul M93B
Magpul MOE+
Magpul trigger guard
Geisselle DMR trigger
LT 20" Stealth upper
KAC URX 3.1 rail
KAC gas block
KAC 600m BUIS
KAC front sight
Gemtech muzzle brake
Gemtech G5 suppressor
Harris bipod with ADM mount and Pod-Lok
C-More 1-6 x 24
LT SPR 1.5 mount

 

[1911]

Factory Surgeon Scalpel 591 rifle in .308
Jewell trigger, 3 lbs
Manners T5A stock
Surgeon DBM bottom metal
Kreiger 18.5" barrel, cerekoted in Burnt Bronze
SF 7.62 SS muzzle brake
SF 7.62SS suppressor
Harris bipod, hydro dipped in MC, Pod-Loc, Phoenix Tactical claw feet, MC carry bag
Surgeon 34mm rings with built in level bubble, cerekoted in sniper black
S&B 5-25x56, P4F with rat tail
ACI angle indicator
Surgeon side 1913 rails cerekoted in burnt bronze
custom stock cheekrest adjustment screw
need to have Badger EFR cerekoted and mounted for KAC UNS clip on

 

[CC INTNL]

Here are a few different setups of the new Voere X3 Precision Rifle.
Switch barrel system from 308 to Cheytac cartridges from the factory.
Various wildcat calibers available from us for the USA market.
The bottom picture is a setup that won this years Luttensee Sniper Competition in Germany.
The next to last is my personal rifle, it has 6.5x47, 308, 338LM, and 375CT barrels with a 375SNipeTac soon

 

[Richard Boucher]

A couple of mine. My OBR and my 2010.

 

[Campy]

LWRC M6IC 1 of 500, Leupold MK6 1-6

LWRC SIX8 UCIW, Cerakoted in MWCOD, SSA-E trigger, Ergo Grip, Surefire scout, griffin Armament RECCE7 mount.

LWRC 16" REPR, Reverse cerakoted byModern Outfitters. It is a Dark Bronze. Surefire Scout, Ergo Grip, Griffin Armament RECCE7 mount

 

[mammynun]

Mega MaTen MKM
Lilja 20"
Geissele SSA-E
SWFA 5-20x FFP
Syrac adjustable gas