Ejected brass striking RMR

Matt Landfair

Matt Six Actual
Staff member
Administrator
What ammo?
Something with more power may fix this - greater than 115gr.

Have you tried a lighter action spring?
147 and 124 +p are optimal for most setups.
 
Have you done a search..? I swear we had this discussion before...

Edited to add I run a 13# recoil spring with everything from 115 practice ammo to 147 duty ammo. I haven't experienced this in my G19 or G34.


Sent from my iPhone using Tapatalk
 

Freedom Forged

Regular Member
Have you done a search..? I swear we had this discussion before...

Edited to add I run a 13# recoil spring with everything from 115 practice ammo to 147 duty ammo. I haven't experienced this in my G19 or G34.


Sent from my iPhone using Tapatalk

Didn't find anything but I didn't spend much time searching either. I may have to order a 13# RS. Do you know what weight the OEM spring is by chance?
 

tylerw02

Regular Member
My gen 4 19 would do this with cheap 115s and the stock recoil spring.

I run a 15 lb ISMI spring and a gen 3 conversion guide rod at it went and it's not an issue now.


Sent from my iPhone using Tapatalk
 

Freedom Forged

Regular Member
Had the issue of brass striking the RMR at least 2 out of 10 rounds. Put in a White Sound H.R.E.D. Extractor Plunger. Replaced the 336 ejector with a 30274 ejector. Shot 200 rounds a few days ago without a single strike. I'm going to call it fixed.
 
Top