CTOMS

[MtnGoat]

CTOMS is a veteran owned company, operating since 2005. We provide both training services and product sales. A small sample of our products and services is as follows.

CTOMS Academy, which is our online training center. These are engaging, produced, narrated and animated videos that run through classes in tactical and non-tactical pre-hospital medical care. Use Coupon Code: P&S25 for a 25% discount on all online Courses and Bundles.

CTOMS also produces comprehensive capability micro-rope systems, micro-rope emergency egress systems, and harness systems used for tactical rotary aviation and high angle operations.

Inquiries on these and other products and services can be made to:
training@ctoms.ca
equipment@ctoms.ca

 

[WhiskeyDeltaGulf]

CTOMS Academy

Use READY25 for a discount on all bundles and courses.

 

[WhiskeyDeltaGulf]

https://ctomsinc.com/products/vector-urban-egress-kit
Vector Urban Egress Kit

Operations in multistory buildings can pose the risk of a barricaded or obstructed exit. Historically there have been circumstances of ambushes on teams where all avenues of exit from the building are blocked and the building was detonated before the team was able to safely escape. It’s also feasible that escape from high to lower floors could be obstructed by fire, structural collapse, escaping crowds, or any number of other variables. While these occurrences are typically rare, survival can be at stake. The VECTOR Kit was designed to be so small, lightweight, and unobtrusive, that you would not even know you are carrying it. Yet it provides a critical egress capability from an urban elevated position that would otherwise be dangerous or impossible to conduct.

The kit allows rapid anchorage of the rope into wood frame, cinder, plaster, etc. construction. The stock 20m rope should allow egress from up to the fifth floor depending on floor heights and interior depth of the anchor. Longer lengths may be possible for special circumstances. The descent control device will provide a controlled descent with up to a 350 lbs. working load.

• CONTENTS:
  • 1 x FIREFLY DEVICE
  • 1 x FIREFLY™ 3.6 MM ROPE (20M OR 46M)
  • 1 x CTOMS MEAT HOOK
  • . 1 x QUICK LINK
  • 2 x DMM PHANTOM SCREW GATE
  • 1 x ROPE BAG (Coyote Brown)
  • 1 x 1” TUBULAR NYLON EDGE PROTECTION SLEEVE
  • 1 x CARRIER POUCH W/ 2 x MALICE CLIPS (options): GP POUCH [Made in USA], (MultiCam, Coyote Brown, Ranger Green, Black)
• Weights & Dimensions:
  • DIMENSIONS: 11cm W x 16cm H x 6.5cm = 1287cm3 (70in3) Volume
  • Total Paraglider Kit with 20m Rope: 600g (1.35 LBS)